企业信息

    武汉费斯德生物科技有限公司

  • 3
  • 公司认证： 营业执照已认证
  • 企业性质：
    成立时间：
  • 公司地址： 湖北省 武汉市 洪山区 东湖新技术开发区高新大道666号武汉国家生物产业基地项目（生物创新园）B.C.D区研发楼B3-3栋3楼
  • 姓名： 付女士
  • 认证： 手机已认证 身份证未认证 微信已绑定

    供应分类

    友情链接

    RheB 活性检测试剂盒/现货供应抗体

  • 所属行业：化工 生物化工
  • 发布日期：2023-05-11
  • 阅读量：31
  • 价格：6800.00 元/套 起
  • 产品规格： 30 Assays
  • 产品数量：99.00 套
  • 包装说明：不限
  • 发货地址：湖北武汉洪山区  
  • 关键词：RheB,活性检测试剂盒,GTP,活性抗体,Activation

    RheB 活性检测试剂盒/现货供应抗体详细内容

    RheB Pull-Down Activation Assay Kit

    Cat. # 81201

    Introduction

    A. Background
    Small GTPases are a super-family of cellular ing regulators. RheB is a member of the Ras-superfamily GTPases. RheB has been shown to interact with C-Raf, Mammalian target of rapamycin (mTOR), TSC2, Ataxia telangiectasia mutated (ATM), KIAA1303 and Ataxia telangiectasia and Rad3 related. Currently there is no direct assay to measure the activation of RheB GTPases.
    The RheB Activation Assay Kit is based on the configuration-specific monoclonal antibody that specifically recognizes RheB-GTP, but not RheB-GDP. Given the high affinity of monoclonal antibodies to their antigens, the activation assay could be performed in a short time. This assay provides the reliable results with consistent reproducibility. These anti-RheB-GTP monoclonal antibodies can also be used to monitor the activation of RheB in cells and in tissues by immunohistochemistry.
    B. Assay Principle
    The RheB Activation Assay Kit uses configuration-specific anti-RheB-GTP Mouse monoclonal antibody to measure RheB-GTP levels in cell extracts or in vitro GTPγS loading RheB activation assays. Anti-RheB-GTP mouse monoclonal antibody is first incubated with cell lysates containing RheB-GTP. Next, the GTP-bound RheB is pulled down by protein A/G agarose. Finally, the precipitated RheB-GTP is detected through immunoblot analysis using Anti-RheB Rabbit Polyclonal Antibody.
    The anti-RheB-GTP monoclonal antibody can also be used to monitor the activation of RheB in cells and in tissues by immunohistochemistry.
    C. Kit Components
    1. Anti-RheB-GTP Mouse Monoclonal Antibody (Cat. # 26910): One vial – 35 µL (1 mg/ml) in PBS, pH 7.4, containing 50% glycerol. This antibody specifically recognizes RheB-GTP from all vertebrates.
    2. Protein A/G Agarose (Cat. # 30301): One vial – 600 µL of 50% slurry.
    3. 5X Assay/Lysis Buffer (Cat. # 30302): One bottle – 30 mL of 250 mM Tris-HCl, pH 8, 750 mM l, 50 mM MgCl2, 5 mM EDTA, 5% Triton X-100.
    4. Anti-RheB Rabbit Polyclonal Antibody (Cat. # 21098): One vial – 50 µL (1 mg/mL) in PBS, pH 7.4, contained 50% glycerol.
    5. 100X GTPγS (Cat. # 30303): One vial – 50 µl at 10 mM, use 5 µL of GTPγS for  GTP-labeling of 0.5 mL of cell lysate.
    6. 100X GDP (Cat. # 30304): One vial – 50 µl at 100 mM, use 5 µL of GDP for GDP-labeling of 0.5 mL of cell lysate.
    7. HRP-Goat Anti-Rabbit IgG (Cat. #29002): 50 µL (0.4 mg/mL) in PBS, pH 7.4, contained 50% glycerol.
    D. Materials Needed but Not Supplied
    1. Stimulated and non-stimulated cell lysates
    2. Protease inhibitors
    3. 4 °C tube rocker or shaker
    4. 0.5 M EDTA at pH 8.0
    5. 1.0 M MgCl2
    6. 2X reducing SDS-PAGE sample buffer
    7. Electrophoresis and immunoblotting systems
    8. Immunoblotting wash buffer such as TBST (10 mM Tris-HCl, pH 7.4, 0.15 M l, 0.05%  Tween-20)
    9. Immunoblotting blocking buffer (TBST containing 5% Non-fat Dry Milk or 3% BSA)
    10. ECL Detection Reagents
    E. Example Results
    The following figure demonstrates example results seen with the RheB Activation Assay Kit. For reference only.
    RheB Activation Assay. Purified RheB proteins were immunoprecipitated after treated with GDP (lane 1) or GTPγS (lane 2). Immunoprecipitation was done with the anti-RheB-GTP monoclonal antibody (Cat. # 26910). Immunoblot was with an anti-RheB rabbit polyclonal antibody (Cat. # 21098).

    Assay Procedure

    A. Reagent Preparation
    1X Assay/Lysis Buffer: Mix the 5X Stock (Cat. # 30301) briefly and dilute to 1X in deionized water. Just prior to usage, add protease inhibitors such as 1 mM PMSF, 10 µg/mL leupeptin, or 10 µg/mL aprotinin.
    B. Sample Preparation
    Adherent Cells
    1. Culture cells (one 10-cm plate, ~107 cells) to approximately 80- confluence. Stimulate the cells with activator or inhibitor as desired.
    2. Aspirate the culture media and wash twice with ice-cold PBS.
    3. Completely remove the final PBS wash and add ice-cold 1X Assay/Lysis Buffer (See Reagent Preparation) to the cells (0.5-1 mL per 10 cm tissue culture plate).
    4. Place the culture plates on ice for 10-20 minutes.
    5. Detach the cells from the plates by scraping with a cell scraper.
    6. Transfer the lysates to appropriate size tubes and place on ice.
    7. If nuclear lysis occurs, the cell lysates may become viscous and difficult to pipette. If this occurs, lysates can be passed through a 27½-gauge syringe needle 3-4 times to shear the genomic DNA.
    8. Clear the lysates by centrifuging at 12,000 x g and 4°C for 10 minutes.
    9. Collect the supernatant and store the sample (~1-2 mg of total protein) on ice for immediate use, or snap freeze and store at -70°C for future use.
    Adherent Cells
    1. Culture cells and stimulate with activator or inhibitor as desired.
    2. Perform a cell count and then pellet the cells through centrifugation.
    3. Aspirate the culture media and wash twice with ice-cold PBS.
    4. Completely remove the final PBS wash and add ice-cold 1X Assay/Lysis Buffer (See Reagent Preparation) to the cell pellet (0.5-1 mL per 107 cells).
    5. Lyse the cells by repeated pipetting.
    6. Transfer the lysates to appropriate size tubes and place them on ice.
    7. If nuclear lysis occurs, the cell lysates may become viscous and difficult to pipette. If this occurs, lysates can be passed through a 27½-gauge syringe needle 3-4 times to shear the genomic DNA.
    8. Clear the lysates by centrifuging at 12,000 x g and 4°C for 10 minutes.
    9. Collect the supernatant and store sample on ice for immediate use, or snap freeze and store at -70°C for future use.
    C. In vitro GTPγS/GDP Protein for Positive and Negative controls
    Note: In vivo stimulation of cells will activate approximately 10% of the available RheB, whereas in vitro GTPγS protein loading will activate nearly of RheB.
    1. Aliquot 0.5 mL of cell extract (or 1 µg of purified RheB protein) into two microcentrifuge tubes.
    2. To each tube, add 20 µL of 0.5 M EDTA (final concentration of 20 mM).
    3. Positive control: add 5 µL of 100 X GTPγS (Cat. # 30302) to the 1st tube
    4. Negative control: add 5 µL of 100 X GDP (Cat. # 30304) to the 2nd tube.
    5. Incubate both tubes at 30°C for 30 minutes with agitation.
    6. Stop loading by placing the tubes on ice and adding 32.5 µL of 1 M MgCl2 (final concentration of 60 mM).
    D. Affinity Precipitation of Activated G Protein
    1. Aliquot 0.5-1 mL of cell lysates (about 1 mg of total cellular protein) to a microcentrifuge tube.
    2. Adjust the volume to 1 mL with 1X Assay/Lysis Buffer (See Reagent Preparation).
    3. Add 1 µL anti-RheB-GTP antibody (Cat. # 26910).
    4. Prepare the protein A/G Agarose bead slurry (Cat. # 30301) by resuspending through vertexing or titrating.
    5. Quickly add 20 µL of resuspended bead slurry to above tube.
    6. Incubate the tube at 4°C for 1 hour with gentle agitation.
    7. Pellet the beads through centrifugation at 5,000 x g for 1 min.
    8. Aspirate and discard the supernatant (making sure not to disturb or remove the bead pellet.
    9. Wash the beads 3 times with 0.5 mL of 1X Assay/Lysis Buffer, centrifuging and aspirating each time.
    10. After the third wash, pellet the beads through centrifugation and carefully remove all the supernatant.
    11. Resuspend the bead pellet in 20 µL of 2X reducing SDS- PAGE sample buffer.
    12. Boil the sample for 5 minutes.
    13. Centrifuge it at 5,000 x g for 10 seconds.
    E. Western Blot Analysis
    1. Load 15 µL/well of pull-down supernatant to a polyacrylamide gel (17%). It is recommended to include a pre-stained MW standard (as an indicator of a successful transfer in step 3 below).
    2. Perform SDS-PAGE following the manufacturer’s instructions.
    3. Transfer the gel proteins to a PVDF or nitrocellulose membrane following the manufacturer’s instructions.
    Note: Steps 4-11 are at room temperature with agitation
    4. Following electroblotting, immerse the PVDF membrane in ** Methanol for 15 seconds, and then allow it to dry at room temperature for 5 minutes.
    Note: If Nitrocellulose is used instead of PVDF, step 4 Should be skipped.
    5. Block the membrane with 5% non-fat dry milk or 3% BSA in TBST for 1 hr at room temperature with constant agitation.
    6. Wash the blotted membrane three times with TBST, 5 minutes each time.
    7. Incubate the membrane with Anti-RheB Rabbit Polyclonal Antibody (Cat. # 21098), which has been freshly diluted 1: 50~500 (depending on the amount of RheB proteins in your sample) in 5% non-fat dry milk or 3% BSA in TBST, for 1-2 hr at room temperature with constant agitation or at 4°C overnight.
    8. Wash the blotted membrane three times with TBST, 5 minutes each time.
    9. Incubate the membrane with a secondary antibody (Cat. # 29002), which is freshly diluted 1: 1000 in 5% non-fat dry milk or 3% BSA in TBST, for 1 hr at room temperature with constant agitation.
    10. Wash the blotted membrane three times with TBST, 5 minutes each time.
    11. Use the detection method of your choice such as ECL.

    http://neweastbio.b2b168.com
    欢迎来到武汉费斯德生物科技有限公司网站， 具体地址是湖北省武汉市洪山区东湖新技术开发区高新大道666号武汉国家生物产业基地项目（生物创新园）B.C.D区研发楼B3-3栋3楼，联系人是付女士。 主要经营GTP酶和癌基因产品，Rac GTP antigody,武汉活性抗体现货集采，active RAC antibody,Rac GTP 小鼠单抗， Anti-Rac1-GTP Monoclonal Antibody,Cdc42 GTP antibody,BRAF(V600E) 小鼠单抗，Rap1 pull down activation assay kit,Rheb 活性检测试剂盒。。 单位注册资金未知。 公司长期供应G蛋白活性抗体及试剂盒,非乙酰化CAMP和CGMP试剂,点突变抗体等，产品质量完全符合行业要求，被用户评为信得过产品，**全国各省市、自治，欢迎新老客户来选购考察！